Solutions for Pneumatic Conveyor Systems
The electronic metal sorters of the hamos FFS series are designed for the
transported by suction and pressure conveying systems. Bulk Raw Materials Detects and removes metal particles in the water.
Metal Detection and Isolation
Max Feedrates greater than 30 meters per secondAlso in
This is done in **real time (in transit)** without interrupting the transfer.
Depending on the conveying method (pressure or suction, continuous or intermittent operation), the
For each process Specially designed separation mechanismis applied.
During the entire metal separation process
The system's internal Keep the feed pressure constantwill be.
The hamos FFS sorter uses the
Not just ferrous metals Recognize and remove all non-ferrous metals as wellin the file.
This allows the
Products, equipment, and tools
Protect against damage from metal contamination
Secure, reliable, and cost-effective protectionYou can.
Products targeted for metal removal are Pneumatic Feed Methodto pass through the metal detection coil.
When a metal particle is detected, the **divider unit (diverter) inside the metal sorter opens.
At this point, the product flow is briefly redirected,
Metal is It falls into the sorter collection bin with a small amount of product.
All Air-assisted pneumatic transfer processIn the
The flow rate in the conveying line and the
Inside metal sorters and conveying lines Overpressure or underpressure remains nearly constantwill be.
Therefore, the Product flow is not interrupted during the separation process.
hamos FFS-L Series Equipment is a
Intermittent Compact Vacuum Transfer Systemsand is used for
Contaminated raw materials are At the end of the feed cycle
Elastic Valve Flapswhich is emitted through the
hamos FFS-P Series Equipment is a
Continuously running Vacuum or pressure transfer systemsand is used for
To prevent the feed flow from being interrupted during the separation process
Double sluice construction with two shutoff valves in seriesis being applied.
Address:3, Baekbong-gil, Cheongbuk-eup, Pyeongtaek-si, Gyeonggi-do, Republic of Korea
Representative : Cho Hun
Business license number : 113-22-11111