Single Material Plastic Separation with Electrostatic Sorters
With the hamos EKS outage sorter
Add the plastic mixture to the Separate each component with a dry processYou can.
The hamos EKS sorter is a
Unnecessary Isolate plastic debrisfor example.
for each plastic Triboelectric (triboelectric) characteristicsby leveraging
The hamos EKS is used to convert mixed raw materials to
Unmixed fractions with less effortto separate them.
This allows the
From mixed plastic waste
Create new, high-quality products
Recover valuable raw materialsYou can.
Optimal screening resultsto get the
Detach from Plastic MixturesThe following conditions must be met
Mixtures of non-conducting materials
Fully decomposed raw materials
(No composite material should remain)
Different Triboelectric (triboelectric) characteristics
Dry raw materials
(Ideal surface moisture content Less than 0.41 TP3T)
Milled Raw Materials
Particle size: 2 to 12 mm
Ideally, the Two-component mixtures
If your raw material is Not sure if you're a good candidate for outage screening?
Talk to an expert.
After the consultation Approximately 20 kg of raw material sampleif you send us a
Our technical centers can help you determine the Selectabilityfor a test.
Through testing
What's achievable with your raw materials Purity and throughputin the following example,
Based on this screening, the Test reportsfor you.
You can then select the
Optimal equipment or systemswe're happy to make suggestions.
After separation into clean fractions,
Your raw materials You'll be amazed at the added value!
Address:3, Baekbong-gil, Cheongbuk-eup, Pyeongtaek-si, Gyeonggi-do, Republic of Korea
Representative : Cho Hun
Business license number : 113-22-11111